Low-bed Semi-trailer
Heavy-Duty Low Bed Semi-Trailer Manufacturer & Supplier
We manufacture heavy-duty low bed semi-trailers for transporting excavators, bulldozers, wheel loaders, mining equipment, industrial machinery, and other heavy or oversized cargo. Available configurations include fixed goosenecks, hydraulic removable goosenecks, multi-axle chassis, recessed equipment wells, and extendable decks, depending on the load and transport requirements.
Payload capacity, deck height, axle configuration, suspension, braking system, and overall dimensions can be specified according to cargo weight and dimensions, tractor compatibility, loading conditions, and destination-market requirements. Standard and customized configurations are available for construction, mining, energy, and industrial transport applications.
Low Bed Semi-Trailer Specifications & Configurations
|
Parameter |
3-Axle Standard Model |
4-Axle Heavy-Duty Model |
Custom Multi-Axle Model |
|
Nominal Payload |
60 metric tons, subject to model confirmation |
80 metric tons, subject to model confirmation |
100–150 metric tons, subject to engineering review |
|
Main Beam Material |
Q690D / HG60, subject to material specification |
Q690D / HG60, subject to material specification |
Specified high-strength structural steel |
|
Gooseneck |
Fixed gooseneck |
Fixed or hydraulic detachable gooseneck, depending on model |
Hydraulic removable gooseneck, where required |
|
Working Deck Height |
Reference range: 850–1,050 mm |
Reference range: 750–950 mm |
Low-profile configurations, potentially below 750 mm |
|
Working Deck Length |
9,000–12,000 mm |
10,000–13,000 mm |
Extendable configurations, up to 22,000 mm where available |
|
Axle Configuration |
3 axles; axle rating to be confirmed |
4 axles; axle rating to be confirmed |
Multi-line or steerable axle systems |
|
Suspension |
Mechanical leaf spring |
Heavy-duty mechanical or air suspension |
Air suspension or hydraulic axle-line system, where available |
|
Tire Configuration |
Options subject to axle load and model |
Options subject to axle load and model |
Heavy-duty tire configurations matched to the required load |
|
Braking System |
Dual-line air brake system; ABS/EBS options subject to configuration |
Dual-line air brake system with applicable ABS/EBS options |
Braking and electronic control systems specified for the selected axle configuration |
Applications
Construction and Earthmoving Equipment
Designed for transporting excavators, bulldozers, wheel loaders, trenchers, and other construction machinery between jobsites. Deck dimensions, loading ramps, and gooseneck configurations can be selected according to equipment weight, track or wheel dimensions, and ground clearance.
Mining and Quarry Equipment
Multi-axle and heavy-duty configurations can be evaluated for transporting drilling rigs, crushers, mining machinery, and off-road equipment. Axle load distribution, tire ratings, and route restrictions should be considered for the intended operating conditions.
Energy and Power Infrastructure
Low bed trailers can be configured for project cargo such as transformers, generator sets, industrial boilers, and selected wind-energy components. Cargo dimensions, center of gravity, lifting points, and securing requirements should be provided during engineering review.
Industrial Machinery and Structural Components
Suitable configurations can be specified for moving large machinery, steel structures, precast concrete components, and other oversized industrial loads. Extendable decks and customized support arrangements may be available for cargo that exceeds standard deck dimensions.
Customization Options
Gooseneck Configurations
Hydraulic Removable Gooseneck (RGN): Enables front-loading for low-clearance wheeled or tracked equipment.
Fixed Gooseneck with Flip Ramps: Standard design for rear-loading via manual or hydraulic ramps.
Deck Designs
Flat Deck: Uniform surface for generic heavy cargo.
Excavator Well / Bucket Pit: Recessed center deck section to drop excavator boom height.
Extendable Main Beam: Telescopic longitudinal frame extending up to 22 meters for long structural loads.


Axle & Steering Systems
Self-Steering Axles: Reduces tire scrub and turning radius on tight urban roads.
Hydraulic All-Wheel Steering: Wireless or manual remote-controlled steering for ultra-long or heavy transport setups.
Ramp System
Heavy-duty spring-assisted manual ramps.
Hydraulic folding ramps (angle < 13° for low-clearance equipment).
Manufacturing & Quality Inspection
Structural Fabrication and Welding
Main longitudinal beams and load-bearing structures are fabricated according to the approved drawings and specified welding procedures. Material grades, welding requirements, and inspection scope should be confirmed for each model.
Non-Destructive Testing (NDT)
Ultrasonic testing (UT) and magnetic particle testing (MT) can be specified for applicable welds and critical structural areas. The inspection locations, coverage, acceptance criteria, and documentation should be agreed upon in the inspection plan.
Surface Preparation and Protective Coating
Steel surfaces are prepared before coating according to the specified surface preparation requirements. A coating system may include zinc-rich epoxy primer and polyurethane topcoat, depending on the order specification.
The target dry film thickness (DFT), coating system, and inspection method should be confirmed in the technical documentation. Salt-spray resistance or a specific corrosion-protection duration should only be stated when supported by relevant test data.
Final Inspection and Testing
Final inspection may include dimensional checks, axle alignment, braking system inspection, lighting checks, and other tests specified for the order. Static load testing, dynamic brake testing, and additional inspections should be performed when required by the applicable test plan and documented acceptance criteria.
Export, Delivery & Spare Parts
Shipping Optimization
Flat Rack / Open Top Containers: Fully assembled trailers ready for immediate deployment upon discharge.
Ro-Ro / Bulk Shipping: Marine-grade anti-corrosion wax coating applied to undercarriage and exposed mechanical surfaces before loading.
Knock-Down (SKD) Shipping: Modular gooseneck and rear ramp assemblies packaged to fit standard 40ft High Cube containers, reducing sea freight costs.
Spare Parts & Wear Items Availability
Standardized components sourced from global supply chains (WABCO valves, BPW/FUWA axle wear parts, Jost landing gear).
Fast-wearing spare kits included per shipment: Brake shoes, air bags, O-rings, lighting modules, and hydraulic seal kits.
Frequently Asked Questions
As one of the most professional low-bed semi-trailer manufacturers and suppliers in China, we also support customized service. Please feel free to buy high quality low-bed semi-trailer for sale here from our factory. For price consultation, contact us.
Mechanical Ladder Lowbed Trailers, Heavy duty Lowbed Trailers, Disassembly Gooseneck Low Bed Trailers