Dump Truck

Dump Truck Manufacturer & Supplier

 

We supply 6x4 heavy-duty dump trucks and 8x4 dump trucks for construction, quarrying, mining support, and bulk material transportation. Configurations can be specified by payload requirements, engine and emission options, drive axle ratings, cargo box dimensions, wear-resistant steel selection, and hydraulic lifting system.


For fleet operators, contractors, quarry owners, and vehicle distributors, the main selection factors are the material being hauled, required payload, road and site conditions, loading equipment, unloading frequency, and local vehicle regulations.

 

 
FirstLast
 
Specifications & Configurations

Technical Parameter

6x4 Heavy-Duty Dump Truck

8x4 Mining & Construction Dump Truck

Gross Vehicle Weight (GVW)

25,000–35,000 kg

31,000–50,000 kg

Payload Capacity

20,000–30,000 kg

30,000–40,000 kg

Engine Options

WEICHAI WP10 / WP12; CUMMINS ISMe

WEICHAI WP12 / WP13; CUMMINS ISGe

Emission Options

Euro 2 / Euro 3 / Euro 5 / Euro 6, subject to engine and market availability

Euro 2 / Euro 3 / Euro 5 / Euro 6, subject to engine and market availability

Engine Power

371–430 HP, depending on engine model

430–500 HP, depending on engine model

Torque

1,500–2,060 Nm, depending on engine model

2,100–2,300 Nm, depending on engine model

Transmission

FAST 10-speed / 12-speed manual; AMT options subject to configuration

FAST 12-speed manual; AMT options subject to configuration

Drive Axles

2 x 16,000 kg double-reduction hub-reduction axles; ratio options: 4.77 / 5.45 / 5.73

2 x 16,000 kg or 20,000 kg double-reduction hub-reduction axles; ratio options: 5.45 / 5.73 / 6.72

Front Axle

1 x 9,000 kg axle

2 x 9,000 kg front axles

Frame / Chassis

High-strength steel double-deck frame (8+8 mm) or triple-deck frame (8+8+8 mm), with local reinforcement as specified

High-strength steel double-deck frame (8+8 mm), with inner reinforcement channel as specified

Cargo Box Dimensions

Length: 5,600–5,800 mm; width: 2,300 mm; height: 1,500 mm; reference volume: 18–20 m3

Length: 7,300–7,600 mm; width: 2,300 mm; height: 1,500–1,800 mm; reference volume: 26–32 m3

Cargo Box Material

Q345B or NM450 / NM500 wear-resistant steel, subject to specification

HARDOX 450 or NM500 wear-resistant steel, subject to specification

Cargo Box Plate Thickness

Bottom: 8–10 mm; sides: 6–8 mm

Bottom: 10–12 mm; sides: 8–10 mm

Hydraulic Lifting System

HYVA FC157 / FC179 front-end cylinder or underbody twin-cylinder system, subject to configuration

HYVA FC191 / FC214 front-end cylinder; safety valve configuration to be confirmed

Tires

12.00R20 / 12.00R24 radial tires, subject to axle and vehicle specification

12.00R20 / 14.00R20 mining-pattern radial tires, subject to axle and vehicle specification

Suspension

Reinforced multi-leaf spring suspension

Semi-elliptic leaf spring suspension; stabilizer bars subject to configuration

 

Applications

Construction and Earthmoving

For hauling soil, sand, gravel, crushed stone, and other bulk construction materials between loading areas, construction sites, and unloading points. Cargo box volume, payload, and unloading clearance should match the material and site conditions.

Quarry and Mining Support

For transporting blasted rock, limestone, aggregate, and selected mineral materials. Buyers should consider material density, fragment size, impact exposure, haul-road conditions, and cargo box wear requirements when selecting the chassis and body configuration.

Demolition and Roadwork

For transporting demolition rubble, excavated material, and asphalt millings where the vehicle configuration and cargo containment arrangements are suitable. Tailgate design and load-retention requirements should be confirmed according to the material and operating site.

 

Customization Options

 

Cargo Box Structure

Choice of U-shape rock body (reduces material adhesion and centers payload impact), square bucket body with vertical ribs, or fully insulated heating body utilizing exhaust gas channels for cold-climate sticky soil discharge.

Steel Grade Selection

Custom material pairing using high-tensile Q345B for light sand/gravel, NM450 for standard quarry work, or HARDOX 450/NM500 wear plates for sharp granite and high-impact ore loading.

6x4Dump Truck manufacturers
Shacman Delong Light Dump Truck

Tailgate Modifications

Hydraulic opening tailgates, top-hinged mechanical lock tailgates with heavy-duty rubber seals, or omitted tailgates for oversized rock dumping.

Chassis & Cab Protection

Front radiator protection guards, reinforced cab roof armor plates against falling rocks, double oil bath air cleaners for dusty desert environments, and differential lock indicator alarms.

 

Quality Inspection & Manufacturing
 

Chassis Fabrication: Frame members may be processed using CNC cutting or punching and assembled using the specified joining method. The actual frame construction, joining process, and inspection criteria should be confirmed from the production drawings and manufacturing procedure.

 

Cargo Box Welding: Welding processes may include submerged arc welding (SAW) and gas-shielded welding where appropriate for the component and approved welding procedure. Weld acceptance criteria should be defined according to the applicable design and inspection requirements.

 

Surface Preparation and Painting: Shot blasting to Sa 2.5 and the use of cathodic electrodeposition primer (KTL) or polyurethane topcoat should be stated only for configurations where these processes are actually used. Confirm the coating system and inspection requirements for the selected vehicle.

 

Hydraulic System Inspection: Confirm the hydraulic system inspection procedure, rated operating pressure, cylinder configuration, and acceptance criteria. Any load-holding or tipping test should be described according to the actual test method and recorded results.

 

Vehicle and Brake Inspection: Pre-delivery checks may include vehicle function, braking system, lighting, steering, and hydraulic operation. Specific road-test distances, slope tests, braking results, and differential-lock tests should be claimed only when supported by the factory's actual inspection records.

 

Export, Delivery & Spare Parts

 

 
 

Shipping Options

Ships fully assembled via Roll-on/Roll-off (Ro-Ro) vessels, Bulk Cargo vessels (with anti-corrosion wax coating and waterproof chassis covers), or semi-disassembled (SKD/CKD) in 40ft High Cube containers to minimize ocean freight costs.

 
 
 

Customs Documentation

Complete export compliance documentation provided, including Certificate of Origin (Form E, Form F, CO), EUR.1 certificates, Third-Party Inspection Reports (SGS, BV, INTERTEK), and engine emission certificates.

 
 
 

Spare Parts Support

Fast-wearing components—such as brake shoe linings, fuel filter elements, hydraulic seals, leaf spring pins, and clutch discs—are stocked in factory warehouses and dispatched within 48 hours via DHL/FedEx or consolidated in container shipments.

 

 

 

FAQ

 

Q: What is the production lead time for a fleet order of dump trucks?

A: Lead time depends on the vehicle configuration, engine availability, order quantity, and production schedule. Confirm the delivery period after the technical specification is approved and the commercial terms are agreed.

Q: How should I choose cargo box material and plate thickness for sand, gravel, or rock?

A: Selection depends on material density, particle size, impact loading, abrasion, loading equipment, and operating conditions. Q345B, NM450, NM500, or HARDOX 450 may be considered according to the required specification. Confirm the plate thickness and material grade with the supplier's technical team rather than relying on material name alone.

Q: How do I select the hydraulic lifting system?

A: The lifting system should be matched to the cargo box dimensions, rated load, load distribution, tipping geometry, and intended material. Confirm the hydraulic cylinder model, operating pressure, lifting configuration, and safety features for the selected vehicle.

Q: Can the truck be configured for tropical, high-altitude, or very cold environments?

A: Selected configurations may include cooling-system options, air filtration, engine preheating, fuel heating, or heated cargo bodies. Confirm the required ambient temperature, altitude, fuel specification, engine configuration, and operating conditions before selecting these options. Suitability for a specific extreme environment should be supported by the relevant vehicle specification.

Q: How is the truck protected during ocean transport?

A: Export preparation may include protective coverings and corrosion-protection measures for exposed surfaces and components. The actual preparation method should be confirmed according to the shipping route, duration, vessel type, and expected exposure. Any coating thickness or corrosion-performance claim should be supported by the applicable specification or inspection records.

Q: What warranty coverage is available for the engine, transmission, and axles?

A: Warranty coverage depends on the vehicle configuration, component supplier, destination market, and sales contract. Confirm the warranty period, mileage limit, start date, covered components, exclusions, and claim procedure in writing before ordering.

As one of the most professional dump truck manufacturers and suppliers in China, we also support customized service. Please feel free to buy high quality dump truck for sale here from our factory. For price consultation, contact us.

12wheels Dump Truck, 10wheels Dump Truck, dump truck