Passenger Vehicle

Passenger Vehicle Manufacturer & Supplier for Commercial Transport and Fleet Applications

 

Passenger vehicles engineered with laser-welded high-strength steel body structures, modern powertrain platforms, and integrated active safety systems. Manufactured under ISO 9001 and IATF 16949 automotive manufacturing standards for regional importers, fleet operators, and vehicle distribution networks.

 

 
 
Vehicle Range

Vehicle Category

Powertrain Options

Seating Capacity

Key Engineering Features

Compact & Mid-Size Sedan

1.5L / 2.0L Turbo / EV

5 Seats

Aerodynamic body profile (Cd 0.28), MacPherson independent front suspension, multi-link rear setup.

Compact & Mid-Size SUV

1.5T / 2.0T / PHEV / EV

5 / 7 Seats

High ground clearance (190mm+), intelligent electronic AWD options, reinforced unibody frame.

Multi-Purpose Vehicle (MPV)

2.0L / Hybrid / EV

7 / 8 Seats

Dual sliding side doors, flexible flat-folding third-row seating, long wheelbase for cabin spaciousness.

New Energy Electric Vehicle (EV)

Battery Electric (BEV)

5 Seats

High-density lithium iron phosphate or ternary lithium packs, thermal battery management, fast-charging architecture.

 

Seating Capacity & Specifications
 

Dimensions & Body Structure

Component

Technical Specifications

Body Construction

High-tensile hot-formed boron steel safety cage; laser-welded roof and side panels

Torsional Rigidity

Over 25,000 Nm/degree, depending on model

Wheelbase

2,650–3,100 mm, depending on vehicle class

Curb Weight / GVWR

Curb weight ranges from approximately 1,300 kg for compact sedans to 2,300 kg for large 7-seat SUVs/EVs; GVWR varies by model

Powertrain & Chassis

Component

Technical Specifications

Petrol Engine Options

1.5L naturally aspirated, 1.5L turbocharged, or 2.0L turbocharged direct-injection engines

Engine Thermal Efficiency

Up to 39%, depending on engine model and test conditions

Electric Motor

Permanent magnet synchronous motor (PMSM)

Battery Capacity

50–100 kWh for electric vehicle models

Driving Range

Up to 600 km WLTP-rated range, depending on model and configuration

Transmission

6-speed manual, 7-speed wet dual-clutch transmission (DCT), or 8-speed automatic transmission (AT)

EV Reduction Gear

Single-speed reduction gear for electric models

Suspension

Front MacPherson strut / rear multi-link independent suspension

Steering

Electric power steering (EPS) with adjustable feedback modes

Braking System

Four-wheel ventilated disc brakes

Electronic Safety Systems

Bosch ESP 9.3, integrating ABS, EBD, traction control, and hill-start assist

 

Toyota Coaster Minibus

 

Applications

Corporate & Executive Transport: Fleet vehicles for business administration, hotel shuttle services, and executive commuting.

 

Car Rental & Ride-Hailing: High-durability sedan and crossover platforms optimized for high-mileage commercial utilization.

 

Municipal & Public Service: Government agency fleets, civil servant transport, and public utility oversight vehicles.

 

Regional Retail Distribution: Dealership network inventory supplying family mobility and private ownership segments.

 

Configuration Options

Engineering adaptations tailored to regional climate conditions, driving sides, and market compliance:

Drive Configuration

 

Left-Hand Drive (LHD) and Right-Hand Drive (RHD) production lines available.

01

Interior Trim & Seating

 

Premium synthetic leather or woven fabric upholstery; Power-adjustable front seats with heating and ventilation options.

02

Infotainment & Telematics

 

10-inch to 15.6-inch central touch displays, smartphone integration (Apple CarPlay / Android Auto), and over-the-air (OTA) software update capability.

03

Advanced Driver Assistance Systems (ADAS)

Adaptive Cruise Control (ACC), Lane Keeping Assist (LKA), Autonomous Emergency Braking (AEB), and 360-degree panoramic surround-view camera systems.

04

Climatic Packaging

 

Tropical cooling packages (heavy-duty compressors and radiators) or cold-weather packages (heated steering wheels, heated seats, and high-capacity battery pre-heaters).

05

 

Quality Inspection & Compliance

Manufacturing Workflow Steps:

  • Stamping & Laser Blanking
  • Automated Robotic Body-in-White (BIW) Welding
  • Cathodic Electrophoretic Deposition (ED) Anti-Rust Priming
  • Multi-Stage Automated Paint Baking & Sealing
  • Powertrain & Chassis Sub-Assembly Integration
  • Four-Wheel Alignment & ADAS Sensor Calibration
  • Final Roller Bench Dynamometer & PDI Road Testing

 

Body-in-White Precision: Main structural joints assembled via automated robotic welding and laser brazing to ensure uniform gap tolerances and crash energy dissipation pathways.

 

Corrosion Protection: Full-body immersion in multi-stage zinc phosphating and cathodic electrophoretic baths, followed by underbody PVC anti-chipping sealant application.

 

Pre-Delivery Verification: Every vehicle undergoes dynamic track testing, water-leak sealing verification, brake response evaluation, and electronic diagnostic scanning before final sign-off.

 

Export & After-Sales Support
 

 

Shipping & Logistics Configurations

Ro-Ro (Roll-on / Roll-off): Fully assembled vehicles driven directly into specialized car carrier vessels, secured with wheel chocks and tie-down straps.

Containerized Transport: Selected models prepared for 40ft High Cube container loading using specialized multi-vehicle racking systems for regional spare parts and low-volume orders.

Spare Parts & Technical Support

Replacement Parts Logistics: Critical maintenance components—including filters, brake pads, suspension parts, lighting assemblies, and ECU modules—are stocked for rapid air or sea freight dispatch.

Technical Documentation: Each fleet delivery includes complete electronic parts catalogs (EPC), diagnostic software access guidelines, wiring schematics, and factory certificate of conformity (CoC) documentation.

 

 

FAQ

 

Q: What international safety and homologation standards do your passenger vehicles meet?

A: Our vehicles are engineered to comply with major international homologation frameworks. We can provide documentation supporting compliance with regional requirements, and our engineering teams assist clients in verifying local market import regulations and lighting/safety standards prior to production.

Q: Can the vehicles be manufactured in Right-Hand Drive (RHD) for our local market?

A: Yes. We operate dedicated production lines supporting both Left-Hand Drive (LHD) and Right-Hand Drive (RHD) configurations, ensuring proper dashboard layouts, steering gear placement, and headlight beam patterns tailored to your country's traffic laws.

Q: What EV battery technologies and charging standards are integrated into your electric models?

A: Our electric vehicles utilize high-stability Lithium Iron Phosphate (LFP) or high-density ternary lithium battery packs equipped with liquid thermal management systems. Charging ports support standard international interfaces such as CCS1, CCS2, or Type 2 depending on regional infrastructure requirements.

Q: How is the vehicle body protected against rust in high-humidity or coastal regions?

A: The vehicle chassis and body stampings undergo multi-stage zinc phosphating and cathodic electrophoretic deposition (ED coating) to seal internal box sections. Cavity wax injection and underbody PVC protective coatings are applied to prevent corrosion from sea salt and high humidity.

Q: What warranty terms and spare parts backing are provided for fleet orders?

A: We offer standard manufacturer warranties covering major powertrain components, chassis assemblies, and electrical systems. For long-term fleet contracts, we supply a recommended spare parts package (SPP) consisting of fast-moving maintenance items and diagnostic interface tools.

Q: What is the typical production lead time for a commercial fleet order?

A: Standard manufacturing lead time ranges from 30 to 45 business days following technical specification confirmation, trim selection, and deposit receipt. Shipping schedules are coordinated based on destination port availability and chosen freight mode (Ro-Ro or containerized transport).

As one of the most professional passenger vehicle manufacturers and suppliers in China, we also support customized service. Please feel free to buy high quality passenger vehicle for sale here from our factory. For price consultation, contact us.